A versatile modular vector set for optimizing protein expression among bacterial, yeast, insect and mammalian hosts
Authors:
Márk Somogyi aff001; Tamás Szimler aff001; Attila Baksa aff001; Barbara M. Végh aff001; Tamás Bakos aff001; Katalin Paréj aff001; Csaba Ádám aff001; Áron Zsigmond aff001; Márton Megyeri aff001; Beáta Flachner aff001; Ráchel Sajó aff001; Éva Gráczer aff001; Péter Závodszky aff001; István Hajdú aff001; László Beinrohr aff001
Authors place of work:
Institute of Enzymology, Research Centre for Natural Sciences, Hungarian Academy of Sciences, Pázmány Péter sétány, Budapest, Hungary
aff001
Published in the journal:
PLoS ONE 14(12)
Category:
Research Article
doi:
https://doi.org/10.1371/journal.pone.0227110
Summary
We have developed a unified, versatile vector set for expression of recombinant proteins, fit for use in any bacterial, yeast, insect or mammalian cell host. The advantage of this system is its versatility at the vector level, achieved by the introduction of a novel expression cassette. This cassette contains a unified multi-cloning site, affinity tags, protease cleavable linkers, an optional secretion signal, and common restriction endonuclease sites at key positions. This way, genes of interest and all elements of the cassette can be switched freely among the vectors, using restriction digestion and ligation without the need of polymerase chain reaction (PCR). This vector set allows rapid protein expression screening of various hosts and affinity tags. The reason behind this approach was that it is difficult to predict which expression host and which affinity tag will lead to functional expression. The new system is based on four optimized and frequently used expression systems (Escherichia coli pET, the yeast Pichia pastoris, pVL and pIEx for Spodoptera frugiperda insect cells and pLEXm based mammalian systems), which were modified as described above. The resulting vector set was named pONE series. We have successfully applied the pONE vector set for expression of the following human proteins: the tumour suppressor RASSF1A and the protein kinases Aurora A and LIMK1. Finally, we used it to express the large multidomain protein, Rho-associated protein kinase 2 (ROCK2, 164 kDa) and demonstrated that the yeast Pichia pastoris reproducibly expresses the large ROCK2 kinase with identical activity to the insect cell produced counterpart. To our knowledge this is among the largest proteins ever expressed in yeast. This demonstrates that the cost-effective yeast system can match and replace the industry-standard insect cell expression system even for large and complex mammalian proteins. These experiments demonstrate the applicability of our pONE vector set.
Keywords:
Yeast – Protein expression – Proteases – Recombinant proteins – Secretion – Protein kinases – Insect vectors – Pichia pastoris
Introduction
Finding the optimal host for the expression of proteins for research purposes often involves expensive and time-consuming testing in multiple expression systems. Since different vectors were developed independently [1–3], they are usually not compatible, holding a different set of restriction sites. This means that in many cases the gene of interest needs to be re-cloned into each vector to be tried, even if the gene itself is unchanged. The expression screening process can be sped up by the use of vectors tailored/designed specifically for quick exchange of genes of interest. One such approach is the pAUL vector system developed for Arabidopsis thaliana [4]. There is also the pCri System with vectors for E. coli, B. subtilis and P. pastoris [5]. Other systems are aimed to handle different problems (e.g. gene-delivery [6], recombinant antibody expression [7] or metabolic engineering in yeast [8].
In this paper we describe a new set of expression vectors, unified for a wide variety of host cells, such as E. coli (bacterium), P. pastoris (yeast), S. frugiperda (insect), and mammalian cells (human embryonic kidney [HEK] and chinese hamster ovary [CHO]). These vectors allow rapid swapping of genetic elements among themselves: they carry a unified multiple cloning site (Fig 1), enabling quick transfer of the target gene from one vector to another by simple excision and ligation. This arrangement also allows modular exchange of secretion signals, affinity tags and protease cleavable linkers among them. Here we describe the development process, involving the reduction or elimination of several restriction sites from the backbone of the vectors. In addition, we demonstrate the functionality of the modified vector set by expressing the maltose binding protein (MBP), often used for affinity labelling, as a reporter protein.
Finally, we show the usefulness of the vector set through its application to a practical problem: expression screening of a large human protein kinase, ROCK2, a large multidomain and multifunctional protein. Disturbances in ROCK2 function are associated with neurodegenerative diseases [9]. ROCK2 has been successfully expressed in the past in insect cell cultures [10]. Our expression screening reveals that ROCK2 kinase expressed in P. pastoris is functionally equivalent to that produced using insect cells. We also managed to purify the protein. To our knowledge, ROCK2 may well be the largest (a dimer of two 164 kDa chains) protein successfully expressed and purified from yeast so far. For comparison only the expression of the complex α3β1 isoform of Na, K ATPase (chain sizes of 110 and 35 kDa, respectively) may be mentioned [11]. The successful production of ROCK2 is an important achievement, since yeast expression systems [2] are cost-effective and scalable. Furthermore, we have demonstrated successful expression of other important human kinases, namely LIM domain kinase 1 (LIMK1) [12] and Aurora kinase A [13] as well as a tumour suppressor protein, Ras association domain-containing protein 1A (RASSF1A) (e.g. [14, 15] by the aid of the elaborated pONE vector set.
Materials and methods
Modification of expression plasmids, construction of pONE vectors
Modification and assembly of recombinant expression plasmids involved standard laboratory practices: polymerase chain reaction, PCR based mutagenesis, restriction digestion and ligation. Relevant protocols are available [16–18]. To unify the multiple cloning sites of the vectors, several restriction sites were removed from the vector backbones using mutagenesis or by a procedure involving restriction digestion of the vector, followed by overhang filling and finally, religation of the vector via the newly formed blunt ends. Sequences encoding for certain affinity tags, secretion signals and protease cleavage sites were also cloned into the vectors, yielding the “pONE” series of vectors. The signal sequence and tags are also separated by well-placed restriction sites for easy exchange between different signals and tags (Fig 1). Despite our efforts, not all restriction sites may work in all vectors, however, there is at least one set of restriction sites that will be unique. The usable (unique) restriction sites are marked in Fig 2 for each of the vectors. For these vectors (Table 1) we propose an easy-to-remember nomenclature, using the following logic: all names begin with pONE-, followed by a number with its first digit denoting the host (1: bacteria, 2: yeast, 3: insect and 4: mammalian)–the second digit is for distinguishing between the individual vectors. Vector names are terminated by a letter marking the antibiotic resistance in the vector (A: ampicillin, K: kanamycin). The resulting vector sequences are available in the supplemental data (S1 Sequences).
Testing the pONE vectors in protein expression experiments
Protein expression was carried out using standard procedures described in the relevant manufacturer/developer supplied manuals for the Escherichia coli pET system [20], transient expression system of insect cells [21], baculovirus-insect cell system [22] and the Pichia classic system [23]. The mammalian transient expression system was based on the pLEXm vector established by Cambridge researchers [1].
To examine protein expression levels among the different vectors, MBP (Maltose Binding Protein) was expressed in itself, and protein yields were compared for each vector using Western blot and densitometry. In addition, to test the vectors in a real-life project, the expression levels of the complex full-length human ROCK2 kinase were also compared in the vectors pONE-10K, -25A, -30A. The genes coding for the proteins were synthetized by Thermo Fisher Scientific GeneArt using the codon preference of insect cells. The sequences are provided in S1 Sequences. Other proteins were also expressed successfully using pONE vectors: pONE-10K proved efficient for expression and purification of Aurora kinase A and various truncated forms of Ras association domain-containing protein 1A (RASSF1A), as well as galectins 13 and 14. LIM domain kinase 1 (LIMK1) was expressed using pONE-30A.
Expression trials in Escherichia coli
For protein expression in bacteria, E. coli BL21 (DE3) cells were transformed with the appropriate plasmids and plated on antibiotic-containing Luria-Bertani broth (LB; plus 50 μg/mL kanamycin or 100 μg/mL ampicillin). A selected colony was inoculated in 20 mL LB medium and incubated overnight at 37°C, 220 rpm in the presence of an antibiotic. Next day, 1 mL or 10 mL of the starter culture was used to inoculate 100 mL or 1 L of LB broth respectively and cells were grown at 37°C, 220 rpm in the presence of an antibiotic. Protein expression was induced by adding 1 mM IPTG to the cell cultures, upon reaching an OD 600 density of ~0.8–0.9. Before induction, cultures were equilibrated to induction temperature 30°C for 0.5 hours. Protein expression was continued for 4 hours at 30°C, 220 rpm.
Expression trials in Pichia pastoris
For expression in P. pastoris, recombinant protein containing vectors were linearized using PmeI or AvrII restriction enzyme–depending on the vector–and transformed via electroporation. Cleaved vector DNA targets the vector for integration into the yeast genome at the cleavage region. Without cleavage transformation efficiency is low and may result in non-expressing clones. PmeI site is present in the vectors with AOX1 promoter, while AvrII is present in the GAP promoter. It should be noted that AvrII is not unique, however the other AvrII site is eliminated in most cloning strategies. If not, the unique BglII site may be used, albeit this results in lower transformation efficiency. Cells were plated on Minimal Dextrose (MD) plates (for vectors with HIS4 metabolic marker) and incubated for 3 days at 30°C. Freshly grown colonies from the plates were picked and grown in 20 mL or 3×100 mL YPD medium at 30°C overnight at 280 rpm. The pre-inoculum was used to inoculate 200 mL or 3×1 L Buffered Media with Glycerol (BMGY) medium and were grown for 8 hours at 30°C at 280 rpm in Erlenmeyer flasks. The flasks were not filled with more media than 25% of nominal volume.
Expression trials in Spodoptera frugiperda
For the pVL based vectors pONE-30A and -31A, Sf9 insect cells were co-transfected with expression plasmid and linearized baculovirus DNA (Oxford Expression Technologies) in a 6-well plate. Baculovirus was amplified in two further rounds (p1 and p2) as a monolayer culture to produce a virus stock ready for infection of the expression cells. Sf9 insect cells at 2×106 cell/mL density were infected with recombinant baculovirus to produce the protein of interest in 2 mL or 500 mL volume in Insect-Xpress medium (Lonza). The infected cells were incubated for 3 days at 27°C with constant shaking at 110 rpm.
For transient transfection of Sf9 cells, pIEx based vectors pONE-32A and -33A were mixed with Insect GeneJuice transfection reagent (Sigma-Aldrich) and added to cell cultures of 2×106 cell/mL density, as described in the Insect GeneJuice datasheet [24]. Transfected cells were incubated for 72 hours at 27°C, before further processing.
Expression trials in the human cell line HEK293
HEK293 mammalian cells were transfected with the mixture of branched polyethylene-imine (No. 408727, Sigma-Aldrich) and pONE-40A (or pONE-41A) constructs (ratio 3:1) at 5×105 cell/mL density in 2 mL Dulbecco’s Modified Eagle’s Medium containing 10% FBS (Fetal Bovine Serum) and penicillin-streptomycin antibiotic. Transfected cells were incubated for 72 hours at 37°C in the presence of 5% carbon-dioxide. After incubation, cells were separated from the medium for further analysis.
Purification of the recombinant proteins
After expression, cells were separated from the expression medium by centrifugation (10 min, 16000 g for E. coli, 4000 g for other hosts). Proteins of interest were localised in different fractions depending on the expression method. Proteins without a secretion signal accumulated inside the cytoplasm and had to be extracted from the cells: The cells were resuspended in a buffer (25 mM HEPES, 500 mM NaCl, 10 mM β-mercaptoethanol, 1 mM PMSF, pH 7.4). Then, cells were lysed via ultrasonic homogenization. Cellular debris was pelleted using centrifugation (45 min, 44000 g), and the protein of interest purified from the cellular supernatant.
Proteins expressed in fusion with a secretion signal appeared in the expression medium and could be purified directly from it.
Before purification, cellular extract or the expression medium containing the protein of interest was filtered through a syringe filter with a pore size of 0.2 μm. All proteins were purified using amylose affinity chromatography. Proteins of interest were eluted by 10 mM maltose, and peak fractions were collected. Aurora A protein was subjected to Ni affinity chromatography using 300 mM imidazole as eluent. Both Aurora A and RASSF1A were further purified by size exclusion chromatography on a column loaded with preparative grade Superose 12 resin.
Determination of protein expression yields
After purification, protein concentrations were determined by UV spectrophotometry using molar extinction coefficients calculated on the basis of a previously published method [25]. Total protein yields for each batch were calculated from the concentration data and the molar weights of the recombinant proteins. Yields were normalized for wet cellular mass measured during each expression.
SDS-PAGE and Western blot analysis
Protein samples were analysed by SDS-PAGE on gels containing 7.5% or 10% acrylamide. The gels were either stained with Coomassie brilliant blue, or further used for Western blotting.
For Western blot analysis, proteins separated by SDS-PAGE were transferred to a nitrocellulose membrane (Bio-Rad) and were blocked by overnight incubation with 10 mL blocking buffer (20 mM Tris, 200 mM NaCl, 0.02% NaN3, pH 7.2) containing 1.5% casein. Proteins were detected via their MBP fusion tag, by immunoblot analysis using a primary antibody (Rb anti-Maltose Binding Protein polyclonal antibody, Abcam) at a dilution of 1:3500 and a secondary antibody (Ms anti-rabbit IgG (γ-chain specific)-peroxidase-conjugated monoclonal antibody, Sigma) at a dilution of 1:10000 in blocking solution. The protein-antibody complexes were detected utilizing a chemiluminescence system (Novex ECL HRP Chemiluminescent Substrate Reagent Kit, Invitrogen). The membranes were exposed for 3 seconds, and images were evaluated using ImageJ software [26] to determine band density. Protein amounts were calculated from density data with the aid of a calibration series of known amounts of purified MBP.
In the case of ROCK2, alkaline phosphatase-conjugated secondary antibody (Gt anti-rabbit IgG, Sigma) was also used at dilution of 1:3000 in blocking solution. After incubation, a mixture of nitro-blue tetrazolium (NBT) and 5-bromo-4-chloro-3'-indolyphosphate (BCIP) was used for antibody complex detection.
Protein functional analysis
Kinase activities were determined using a Z’-LYTE Peptide Kinase Assay [27], with substrates Ser/Thr peptide 1 for Aurora A and Ser/Thr peptide 13 for other kinases. Reaction buffer contained 50 mM HEPES (pH 7.5), 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35, 1% DMSO, 20 μM ATP and 2 μM peptide substrate. The kinase reactions were incubated at 30°C for 1 hour, followed by development by the included protease at 25°C for 1 hour. Fluorescence emissions were detected at 445 nm and 520 nm using an EnSpire Multimode Plate Reader. Based on the emission values, and by using phosphorylation control solutions, phosphorylation amounts for each reaction were calculated using the formula provided in the Z’-Lyte manual [28]. Phosphorylation percentage values were directly converted to concentrations. Reactions with no more than 10% substrate consumption could be assumed to be in the linear kinetics stage. Initial velocities were calculated from these data. We have obtained normalised activity values by dividing these initial velocities by the concentration of the enzyme (expressed in monomers).
Results and discussion
Vector design
Our modular, unified vector system, named pONE permits a one-step exchange of the gene of interest among the vectors for recombinant protein expression in bacteria (E. coli), yeast (P. pastoris), insect cell (S. frugiperda) and mammalian cells (HEK293 or CHO). This compatibility is ensured by an expression cassette with its multiple cloning site unified between all pONE vectors (Fig 1). The multiple cloning site is not totally identical in all vectors, but for any pair of vectors selected, there exists at least one compatible combination of restriction sites, which might be used for direct cloning (Fig 2). The expression cassette (Fig 1) also has genes for MBP (N-terminal) and His6 (C-terminal) fusion affinity tags, and an N-terminal secretion signal may be included, too (before the MBP-tag).
MBP was chosen because it can be used directly in affinity purification schemes using relatively inexpensive, common chromatographic media and it is widely regarded as a protein folding chaperone that increases expression level of proteins fused to it (demonstrated in E. coli and even in P. pastoris [29]).
The linker between the MBP and the target gene encodes the recognition site for either a Tobacco Etch Virus protease (TEV [30, 31]) or a WELQut [32] protease, allowing the removal of the large MBP tag from the protein product. The length and composition of the linker can be fine-tuned by the careful selection of restriction sites for cloning. For example, the protease cleavage site, a short hydrophobic streak or a Pro-Arg pair (providing some rigidity) can be excluded or included depending on this choice. The expression cassette is modular in nature, meaning that all auxiliary genes (affinity tags, secretion signal, and protease cleavage site) are flanked by restriction sites, so they can be replaced or removed easily.
The pONE vector set contains bacterial, yeast, insect cell (baculoviral and transient) and mammalian vectors, which are based on the commercially available pET-24d [20], pPIC9K [23], pVL1393 [22], pIEx-1 [21] and pLEXm [1] vectors, respectively (Table 1 and Fig 2). These vectors were selected because they are regarded as some of the best expression vectors available. Most of these vectors were created in two variants: one including a secretion signal specific for its host, and one without a secretion signal. The secretion variants have WELQut, while the intracellular ones have TEV protease cleavage sites.
The protease choice was dictated by the buffers: TEV protease is a cysteine protease which needs reducing environment for catalytic activity. The WELQut protease functions well in oxidising environments too, because it is a serine protease, and therefore not redox-sensitive. Intracellular cytosolic proteins often have free cysteines and require reducing conditions in vitro to keep them active and prevent their aggregation. Secreted proteins are usually transferred into the extracellular space, and often have disulphide bonds required for their structural stability. The reducing TEV protease buffers present a risk for these disulphide bridges. The non-reducing WELQut protease buffers are better suited for redox-sensitive proteins.
The bacterial vector uses the T7 promoter, enabling powerful induction of protein expression upon addition of IPTG. The Pichia expression systems traditionally utilize the AOX1 promoter, which can be induced by the addition of methanol when no other carbon source is present. We have also created a Pichia vector (pONE-25A), which has a constitutively active GAP promoter. GAP promoter eliminates the need for using methanol and is less stressful for the cells, which is an advantage in some situations, especially in large-scale applications. The pIEX (pONE-32A and -33A) and pLEXm (-40A and -41A) based vectors can be used for transient transfection of insect and mammalian hosts, respectively, therefore they use constitutive promoters too. For insect cells, baculovirus-based vectors (pONE-30A and -31A) were also constructed.
Trial expressions with blank vectors
To test the functionality of pONE vectors, we have performed various trial expressions. In the first series of experiments, “empty” vectors were tested to check whether the modifications did affect their performance, and also to see if the protein is targeted properly in the presence or absence of a secretion signal. Since all components of the expression cassette are in frame (Fig 1), the “empty” vectors yield fusion protein products, with MBP as their major part. These experiments were performed with all vectors, excluding pONE-25A, which was tested by expressing ROCK2 kinase (cf. next chapter). After expression, total protein content of the cells and expression media were analysed–the recombinant product was detected via Western blot using an MBP-specific antibody. The resulting blot images, with three parallel experiments for each pONE construct are presented in Fig 3. From these data the relative distribution of MBP between the medium and cytoplasm was calculated for each vector and are summarized in Table 2.
These experiments prove that all pONE vectors are functional–significant quantities of MBP were produced by each expression system (Fig 3). In general, it is in line with those observations, that found MBP is a useful and expression enhancing tag even in higher eukaryotes [33–36]. The variations between parallel experiments are relatively small, indicating reproducibility of expression. Protein targeting works very well–although in the case of the pONE-31A (and probably -41A) secretion vectors pronounced intracellular protein retention could be detected. This could be explained by aggregation of the overexpressed protein, which reduces secretion efficiency. For pONE-31A another possible cause might be the blockage of the endoplasmic reticulum by baculoviral proteins.
Expression of a complex protein kinase, ROCK2
In the next phase of the project, we applied the pONE vectors to a real-life problem. To study the activation mechanism of ROCK2, a large size (molecular mass of 164 kDa) multidomain, multifunctional kinase, associated with neurodegenerative diseases [9, 37], by in vitro experiments we aimed to develop a reproducible protocol for its expression and purification. Therefore, to determine which provides the most functional protein, we have performed a systematic expression screen of ROCK2 in expression hosts E. coli, P. pastoris and the baculovirus-insect cell system. As ROCK2 has successfully been produced in insect cells in the past [10], we expected this host to be the most suitable one.
A variant of the ROCK2 gene, optimized for expression in insect cells, was synthesized for the expression screening. This gene was ligated into the intracellular vectors pONE-10K (E. coli), pONE-25A (P. pastoris) and pONE-30A (S. frugiperda). After expression, recombinant ROCK2 was purified from the cell lysates using amylose affinity chromatography. Samples were taken after both protein expression and purification for analysis by SDS-PAGE and Western blotting (Fig 4). Protein yields, normalized to wet cellular mass are presented in Table 3 –all data represent three parallel experiments. As a functional test of the recombinant proteins their enzymatic activities were also measured as described in Methods.
Expression in insect cells (S. frugiperda) was robust (Fig 4), with negligible protein degradation (relative amounts are shown better by Coomassie staining than by Western blotting). In contrast, we have found that E. coli is ill-suited for ROCK2 expression, even when using the codon supplemented Rosetta2 strain. Most of the product is degraded or expressed truncated–the amount of full-length ROCK2 is minuscule. For expression in yeast cells (P. pastoris) we have utilized a protease-deficient strain SMD1168. Here ROCK2 was expressed under the GAP promoter. The product was at least as homogenous as that expressed by the baculovirus-insect cell system.
For functional comparison of the ROCK2 products expressed in different hosts we have performed enzyme activity measurements using a Z’-Lyte assay kit (cf. Materials and methods). We cannot be sure if the substrate concentrations used in these experiments (especially the peptide at 2 μM) are at saturation. Because the conditions were identical in all reactions, the resulting activities are suitable for comparison between ROCK2 forms expressed in various hosts. Activities obtained were 0.03 ±0.01, 1.44 ±0.73, 1.05 ±0.38 [mole product] / ([mole enzyme] * min) for E. coli, S. frugiperda and P. pastoris, in the same order. These data also support that E. coli is unfit for ROCK2 expression: this product proved practically inactive. Insect cell- and yeast-produced ROCK2 functioned much better, with comparable activities.
Our experiments demonstrate that ROCK2 purified from yeast cells is functionally equivalent to the protein expressed in insect cells. Expression in the insect cells (S. frugiperda) still yields more ROCK2 per unit of cellular mass compared to yeast (P. pastoris). However, considering that protein expression in yeast is cheaper and much more scalable than in insect cells, P. pastoris could be, in many cases, a better and more economical choice for ROCK2 production, especially if mutagenesis studies are to be performed.
Further examples for application of the pONE vector set
We have also successfully applied the pONE vector set to the expression of a number of other proteins. Namely, the tumour-suppressor RASSF1A, its oncogenic protein kinase, Aurora A [38]and another protein kinase, LIMK1. For these proteins, we do not show the expression trials, only the results of their expression and purification using the finally selected vectors (Fig 5, Table 3). Other examples for successful application of pONE vectors are described elsewhere: the expression of immunomodulators galectin-13 and -14 [39] and variants of UDP-glycosyltransferase [40]. The two galectins, the glycosyltransferase, the kinase domain of Aurora A and a deletion mutant of RASSF1A (with residues 121–340) could be obtained in a pure and functional form by expression in E. coli using the vector pONE-10K. LIMK1 was expressed in insect cells using the baculovirus based vector, pONE-30A. This enzyme could also be purified in an active, functional form.
Comparison between the pONE vector set and existing expression systems
Expression vectors of different origins are rarely developed with compatibility in mind. This complicates the expression screening process often necessary when working with novel proteins. There are multiple vector systems designed to facilitate expression screening of various hosts, promoters or fusion tags. Some examples are the pBV boost [41], pDEP [42], pAUL [4] or pCri [5] systems. However, most systems are suitable only for a limited set of hosts, do not include variable auxiliary elements (expression tags, signal peptides), utilize complicated cloning techniques, or were developed for a specific task making them ill-suited for general research purposes.
The pONE system includes vectors for the four most widely used expression hosts: the bacterial, yeast, insect and mammalian systems. These vectors share a unified expression cassette, which allows rapid transfer of genes of interest between them. Cloning is achieved by the common restriction digestion/ligation method, which does not require expensive reagents or special knowledge, and is readily available at most research laboratories. The expression cassette also includes genes for MBP- and His6- fusion tags and in some vectors a secretion signal too. These are flanked by restriction sites and so can easily be removed or replaced by other sequences. The linker between MBP and the protein of interest includes a protease cleavage site, so MBP can be removed from the product easily. Also, the length and composition of the linker can be fine-tuned by selecting the appropriate restriction site for cloning. To sum up, the pONE vector set is a useful tool for general expression screening in a wide variety of host organisms, affinity tags and protein targeting, most suitable for small-scale research use.
Conclusion
We have developed a new set of expression vectors, named the pONE series, suitable for protein expression in various, common host organisms. These vectors carry a unified, modular expression cassette, which allows rapid expression screening of novel proteins, and easy manipulation of fusion tags and signal peptides. Trial expressions of MBP protein carried by the “empty” vectors proves the functionality of all members of the vector set, including the proper targeting of recombinant proteins by an optional secretion signal. We have also demonstrated the usefulness of pONE vectors by applying them to the expression and purification of various complex proteins, namely ROCK2, LIMK1 and Aurora A kinases, the tumour suppressor RASSF1A and immunomodulators galectin-13 and -14. A significant finding of practical importance arose from the expression screening of ROCK2. Expression of this large, multi-domain protein in P. pastoris yielded a product with equal activity to that expressed in insect cell culture, which is commonly used for production of ROCK2. Since yeast-based expression systems are far more scalable than insect cell cultures, we expect that these results provide a promising alternative instead of the error-prone and costly insect cell expression.
Supporting information
S1 Raw Images [m]
Raw originals of gel and Western blot images presented in the paper.
S1 Fig [i]
Functionality of the TEV protease cleavage site using MBP-ROCK2 fusion protein as example.
S1 Sequences [zip]
The vector and protein sequences described in this study in FASTA format.
Zdroje
1. Aricescu AR, Lu W, Jones EY. A time- and cost-efficient system for high-level protein production in mammalian cells. Acta Cryst D. 2006;62:1243–50.
2. Ahmad M, Hirz M, Pichler H, Schwab H. Protein expression in Pichia pastoris: recent achivements and perspectives for heterologous protein production. Appl Microbiol Biotechnol. 2014;98:5301–17. doi: 10.1007/s00253-014-5732-5 24743983
3. Zitzmann J, Sprick G, Weidner T, Schreiber C, Czermak P. Process optimization for recombinant protein expression in insect cells. In: Gowder SJT, editor. New insights into cell culture technology. 1. London, UK: InTechOpen; 2017. p. 43–97.
4. Lyska D, Engelmann K, Meierhoff K, Westhoff P. pAUL: A Gateway-Based Vector System for Adaptive Expression and Flexible Tagging of Proteins in Arabidopsis. PLoS One. 2013;8(1):e53787. doi: 10.1371/journal.pone.0053787 23326506
5. Goulas T, Cuppari A, Garcia-Castellanos R, Snipas S, Glockshuber R, Arolas JL, et al. The pCri system: A vector collection for recombinant protein expression and purification. PloS One. 2014;9(11):e112643. doi: 10.1371/journal.pone.0112643 25386923
6. Deng X, Zhang G, Zhang L, Feng Y, Li Z, Wu G, et al. Developing a Novel Gene-Delivery Vector System Using the Recombinant Fusion Protein of Pseudomonas Exotoxin A and Hyperthermophilic Archaeal Histone HPhA. PloS One. 2015;10(11):e0142558. doi: 10.1371/journal.pone.0142558 26556098
7. Martin CD, Rojas G, Mitchel JN, Vincent KJ, Wu J, McCafferty J, et al. A simple vector system to improve performance and utilisation of recombinant antibodies. BMC Biotechnology. 2006;6:46. doi: 10.1186/1472-6750-6-46 17156422
8. Fang F, Salmon K, Shen MWY, Aeling KA, Ito E, Irwin B, et al. A vector set for systematic metabolic engineering in Saccharomyces cerevisiae. Yeast. 2011;28(2):123–36. doi: 10.1002/yea.1824 20936606
9. Koch JC, Tatenhorst L, Roser A-E, Saal K-A, Tönges L, Lingor P. ROCK inhibition in models of neurodegeneration and its potential for clinical translation. Pharmacol Ther. 2018;189:1–21. doi: 10.1016/j.pharmthera.2018.03.008 29621594
10. Truebestein L, Elsner DJ, Fuchs E, Leonard TA. A moleculer ruler regulates cytoskeletal remodelling by the Rho kinases. Nat Commun. 2015;6:10029. doi: 10.1038/ncomms10029 26620183
11. Hirz M, Richter G, Leitner E, Wriessnegger T, Pichler H. A novel cholesterol-producing Pichia pastoris strain is an ideal host for functional expression of human Na,K-ATPase α3β1 isoform. Appl Microbiol Biotechnol. 2013;97:9465–78. doi: 10.1007/s00253-013-5156-7 23955473
12. Scott RW, Olson MF. LIM kinases: function, regulation and association with human disease. J Mol Med. 2007;85:555–68. doi: 10.1007/s00109-007-0165-6 17294230
13. Yan M, Wang C, He B, Yang M, Tong M, Long Z, et al. Aurora-A kinase: A potent oncogene and target for cancer theraphy. Med Res Rev. 2016;36(6):1036–79. doi: 10.1002/med.21399 27406026
14. Donninger H, Vos MD, Clark GJ. The RASSF1A tumor suppressor. J Cell Sci. 2007;120(Pt 18):3163–72. Epub 2007/09/20. 120/18/3163 [pii] doi: 10.1242/jcs.010389 17878233.
15. Amin KS, Banerjee PP. The cellular functions of RASSF1A and its inactivation in prostate cancer. J Carcinog. 2012;11(3):31–8. Epub 2012/03/23. doi: 10.4103/1477-3163.93000 JC-11-3 [pii]. 22438769.
16. Chen B-Y, Janes HW. PCR cloning protocols: Humana Press; 2002.
17. Green MR, Sambrook J. Molecular cloning: A laboratory manual. 4th ed. Cold Spring Harbor, NY, USA: Cold Spring Harbor Laboratory Press; 2012.
18. Reeves A. In vitro mutagenesis: Humana press; 2017.
19. Hall TA. BioEdit: a user-friendly biological sequence alignment editor and analysis program for Windows95/98/NT. Nucleic Acids Symp. 1999;41(1):95–8.
20. NovaGen. pET system manual. 11th ed: Merck; 2006.
21. Loomis KH, Yaeger KW, Batenjany MM, Mehler MM, Grabski AC, Wong SC, et al. InsectDirectTM System rapid, high-level protein expression and purification from insect cells. J Struct Funct Genomics. 2005;6:189–94. doi: 10.1007/s10969-005-5241-y 16211518
22. Invitrogen. Guide to Baculovirus Expression Vector Systems (BEVS) and insect cell culture techniques: Life Technologies Corporation.
23. Invitrogen. Pichia expression kit manual: Life Technologies Corporation; 2014.
24. Novagen. Insect GeneJuice transfection reagent. 2009.
25. Pace CN, Vajdos F, Fee L, Grimsley G, Gray T. How to measure and predict the molar absorption coefficient of a protein. Protein Sci. 1995;4:2411–23. doi: 10.1002/pro.5560041120 8563639
26. Schneider CA, Rasband WS, Eliceiri KW. NIH to ImageJ: 25 years of image analysis. Nat Methods. 2012;9(7):671–5. doi: 10.1038/nmeth.2089 22930834
27. Rodems SM, Hamman BD, Lin C, Zhao J, Shah S, Heidary D, et al. A FRET-based assay platform for ultra-high density drug screening of protein kinases and phosphatases. Assay Drug Dev Technol. 2002;1(1–1):9–19.
28. Invitrogen. Z'-LyteTM kinase assay kit. 2005.
29. Bach H, Mazor Y, Shaky S, Shoham-Lev A, Berdichevsky Y, Guttnick DL, et al. Escherichia coli maltose-binding protein as a molecular chaperone for recombinant intracellular cytoplasmic single-chain antibodies. J Mol Biol. 2001;312(1):79–93. doi: 10.1006/jmbi.2001.4914 11545587
30. Kapust RB, Tözsér J, Copeland TD, Waugh DS. The P1' specificity of tobacco etch virus protease. Biochem Biophys Res Commun. 2002;294(5):949–55. doi: 10.1016/S0006-291X(02)00574-0 12074568
31. Cabrita LD, Gilis D, Robertson AL, Dehouck Y, Rooman M, Bottomley SP. Enhancing the stability and solubility of TEV protease using in silico design. Protein Sci. 2007;16(11):2360–7. doi: 10.1110/ps.072822507 17905838
32. Pustelny K, Zdzalik M, Stach N, Stec-Niemczyk J, Cichon P, Czarna A, et al. Staphylococcal SpIB serine protease utilizes a novel molecular mechanism of activation. J Biol Chem. 2014;289(22):15544–53. doi: 10.1074/jbc.M113.507616 24713703
33. Dälken B, Jabulowsky RA, Oberoi P, Benhar I, Wels WS. Maltose-binding protein enhances secretion of recombinant human granzyme B accompanied by in vivo processing of a precursor MBP fusion protein. PloS One. 2010;5(12):e14404. doi: 10.1371/journal.pone.0014404 21203542
34. Scholz J, Besir H, Strasser C, Suppmann S. A new method to customize protein expression vectors for fast, efficient and background free parallel cloning. BMC Biotechnology. 2013;13:12. doi: 10.1186/1472-6750-13-12 23410102
35. Bokhove M, Sadat Al Hosseini H, Saito T, Dioguardi E, Gegenschatz-Schmid K, Nishimura K, et al. Easy mammalian expression and crystallography of maltose-binding protein-fused human proteins. J Struct Biol. 2016;194(1):1–7. doi: 10.1016/j.jsb.2016.01.016 26850170
36. Reuten R, Nikodemus D, Oliveira MB, Patel TR, Brachvogel B, Breloy I, et al. Maltose-Binding Protein (MBP), a Secretion-Enhancing Tag for Mammalian Protein Expression Systems. PloS One. 2016;11(3):e0152386. doi: 10.1371/journal.pone.0152386 27029048
37. Herskowitz JH, Feng Y, Mattheyses AL, Hales CM, Higginbotham LA, Duong DM, et al. Pharmacologic Inhibition of ROCK2 Suppresses Amyloid-B Production in an Alzheimer’s Disease Mouse Model. J Neurosci. 2013;33:19086–98. doi: 10.1523/JNEUROSCI.2508-13.2013 24305806
38. Szimler T, Gráczer É, Györffy D, Végh B, Szilágyi A, Hajdú I, et al. New type of interaction between the SARAH domain of the tumour suppressor RASSF1A and it mitotic kinase Aurora A. Sci Rep. 2019;9:5550. doi: 10.1038/s41598-019-41972-x 30944388
39. Balogh A, Toth E, Romero R, Parej K, Csala D, Szenasi NL, et al. Placental galectins are key players in regulating the maternal adaptive immune response. Front Immunol. 2019. doi: 10.3389/fimmu.2019.01240 31275299
40. Mirmazloum I, Ladányi M, Beinrohr L, Kiss-Bába E, Kiss A, György Z. Identification of a novel UDP-glycosyltransferase gene from Rhodiola rosea and its expression during biotransformation of upstream precursors in callus culture. Int J Macromol. 2019;136:847–58.
41. Laitinen OH, Airenne KJ, Hytönen VP, Peltomaa E, Mähönen AJ, Wirth T, et al. A multipurpose vector system for the screening of libraries in bacteria, insect and mammalian cells and expression in vivo. Nucleic Acids Res. 2005;33(4):e42. doi: 10.1093/nar/gni042 15731335
42. Sinah N, Williams CA, Piper RC, Shields SB. A set of dual promoter vectors for high throughput cloning, screening, and protein expression in eukaryotic and prokaryotic systems from a single plasmid. BMC Biotechnology. 2012;12:54. doi: 10.1186/1472-6750-12-54 22916790
Článek vyšel v časopise
PLOS One
2019 Číslo 12
- Řekněte mi, co jíte, a já vám řeknu, jaká je úroveň vaší kognice
- Původní český test ALBA pro odhalení mírných kognitivních deficitů získal certifikaci MZ ČR
- Duševní onemocnění se u teenagerů přenáší v rámci školní třídy
- Od kostiček k lidské kůži. Jak si postavit 3D biotiskárnu?
- Prof. Libor Grubhoffer: Nová varianta mpox je příležitostí pokročit v poznání původce varioly
Nejčtenější v tomto čísle
- Methylsulfonylmethane increases osteogenesis and regulates the mineralization of the matrix by transglutaminase 2 in SHED cells
- Oregano powder reduces Streptococcus and increases SCFA concentration in a mixed bacterial culture assay
- The characteristic of patulous eustachian tube patients diagnosed by the JOS diagnostic criteria
- Parametric CAD modeling for open source scientific hardware: Comparing OpenSCAD and FreeCAD Python scripts