3D printing in neurosurgery – our experience
Authors:
P. Buchvald 1; J. Vitvar 2; L. Čapek 2
Authors‘ workplace:
Neurochirurgické oddělení, Krajská Nemocnice Liberec
1; Oddělení klinické biomechaniky, Krajská nemocnice Liberec
2
Published in:
Cesk Slov Neurol N 2023; 86(5): 329-332
Category:
Short Communication
doi:
https://doi.org/10.48095/cccsnn2023329
Overview
Aim: The aim of this work was to evaluate our experience with the 3D printing method in neurosurgery. In addition to the well-known utilization of cranial implants, a significant use of this modern, rapidly developing technology is possible.
Methods: We present and evaluate the series of our ten patients, which we operated on using 3D printing methods. In the field of vascular neurosurgery, four cases involved a brain aneurysm model and one arteriovenous malformation model. In two patients, this method contributed to the closure of the skull base defect with a custom-shaped cranial grid and in neuro-oncology, it improved the visualization of skull base tumors in two patients. In one patient, the 3D model of the C2 vertebra allowed the choice of the optimal trajectory of the fixation material. Results: In the mentioned cases, the desired result was achieved and the 3D printing method was adapted to the correct treatment in all patients.
Conclusion: Based on our experiences, we can claim that the 3D printing method, in addition to the already commonly used 3D implantology, also presents a new and interesting modality in the field of neurosurgical planning, simulation and training. We assume that it will be increasingly used in many areas of neurosurgery.
Keywords:
neurosurgery – 3D printing – 3D imaging – neurosurgical planning – neurosurgical simulation – neurosurgical training
Sources
1. Wang X, Shujaat S, Shaheen E et al. Quality and haptic feedback of three-dimensionally printed models for simulating dental implant surgery. J Prosthet Dent 2022; S0022-3913 (22) 00201-3. doi: 10.1016/j.prosdent.2022.02.027.
2. Thiong‘o GM, Bernstein M, Drake JM. 3D printing in neurosurgery education: a review. 3D Print Med 2021; 7 (1): 9. doi: 10.1186/s41205-021-00099-4.
3. Ryan JR, Almefty KK, Nakaji P et al. Cerebral aneurysm clipping surgery simulation using patient-specific 3D printing and silicone casting. World Neurosurg 2016; 88: 175–181. doi: 10.1016/j.wneu.2015.12.102.
4. Liu Y, Gao Q, Du S et al. Fabrication of cerebral aneurysm simulator with a desktop 3D printer. Sci Rep 2017; 44301 (7). doi: 10.1038/srep44301.
5. Woo SB, Lee CY, Kim CH et al. Efficacy of 3D-printed simulation models of unruptured intracranial aneurysms in patient education and surgical simulation. J Cerebrovasc Endovasc Neurosurg 2022. doi: 10.7461/jcen.2022.E2022.09.002.
6. Park CK. 3D-printed disease models for neurosurgical planning, simulation, and training. J Korean Neurosurg Soc 2022; 65 (4): 489–498. doi: 10.3340/jkns.2021. 0235.
7. Dho YS, Lee D, Ha T et al. Clinical application of patient-specific 3D printing brain tumor model production system for neurosurgery. Sci Rep 2021; 7005 (11). doi: 10.1038/s41598-021-86546-y.
8. Ploch CC, Mansi CSSA, Jayamohan J et al. Using 3D printing to create personalized brain models for neurosurgical training and preoperative planning. World Neurosurg 2016; 90: 668–674. doi: 10.1016/j.wneu.2016.02.081.
9. Randazzo M, Pisapia JM, Singh N et al. 3D printing in neurosurgery: a systematic review. Surg Neurol Int 2016; 7 (33): S801–S809. doi: 10.4103/2152-7806.194059.
10. Buchvald P, Čapek L, Suchomel P. Počítačem modelované náhrady kostních defektů lební klenby. Cesk Slov Neurol N 2009; 72/105 (2): 169–172.
11. De La Peña A, De La Peña-Brambila J, Pérez-De La Torre J et al. Low-cost customized cranioplasty using a 3D digital printing model: a case report. 3D Print Med 2018; 4 (1): 4. doi: 10.1186/s41205-018-0026-7.
12. Tan ET, Ling JM, Dinesh SK. The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer. J Neurosurg 2016; 124 (5): 1531–1537. doi: 10.3171/2015.5.JNS15119.
13. Grillo FW, Souza VH, Matsuda RH et al. Patient-specific neurosurgical phantom: assessment of visual quality, accuracy, and scaling effects. 3D Print Med 2018; 4 (1): 3. doi: 10.1186/s41205-018-0025-8.
14. Seidl M, Mraček J, Dostál J et al. Počítačově modelovaná kranioplastika z porózního polyethylenu v rizikovém terénu. Cesk Slov Neurol N 2022; 85/118 (5): 410–413. doi: 10.48095/cccsnn2022410.
Labels
Paediatric neurology Neurosurgery NeurologyArticle was published in
Czech and Slovak Neurology and Neurosurgery
2023 Issue 5
Most read in this issue
- Selection of the appropriate surgical approach for the treatment of the most prevalent craniosynostosis
- Delirium and sleep in intensive care I – epidemiology, risk factors and outcomes
- 3D printing in neurosurgery – our experience
- Delirium and sleep in intensive care II – monitoring and diagnostic options