#PAGE_PARAMS# #ADS_HEAD_SCRIPTS# #MICRODATA#

PROTECTIVE ASPECTS IN CONTACTLESS INFRARED THERMOGRAPHY FEVER SCREENING


Authors: Vladan Bernard;  Erik Staffa;  Aleš Bourek;  Marek Dostál;  Vojtěch Mornstein;  Tomáš Jůza;  Jana Pokorná
Authors place of work: Department of Biophysics, Faculty of Medicine, Masaryk University, Brno, Czech Republic
Published in the journal: Lékař a technika - Clinician and Technology No. 3, 2020, 50, 95-100
Category: Original research
doi: https://doi.org/10.14311/CTJ.2020.3.03

Summary

Main symptoms found in patients with same diseases as for example COVID-19 is febrile. The infrared thermography (IRT) represents a fast measurement in case of screening in public places. One of the limitations of IRT is the resolution of sensor, which has close connection with the distance between camera and ROI. To maximize the effectivity of resolution of the camera is to reduce the distance from the object. The aim of presented study showed the possibility how to protect the camera or medical staff that operates the device against potential infection or contamination from the person with infection. Two protective foils of different thickness (40 μm; 9 μm) were tested as a barrier between the IRT and the ROI (black body model and human face). Even though the results have shown that the transparent foils decrease linearly the measured value of the temperature, it can be used as a protective barrier between IRT and the object if an appropriate recalculation is done during analysis of IRT images. Results are acceptable in the case of 9μm foil especially. The authors see this possibility as a minor concession from IRT standards but as a great help in health protection. The transparent foil can be used as protective barrier of the infrared camera.

Keywords:

febrile screening – infrared thermography – protective foil

Introduction

Infrared thermography (IRT) is a non-invasive, con-tactless method for the measurement of surface temperature. Low operational costs, speed of the examination and no radiation hazard for both the patient and medical staff are its main advantages. Because of these benefits, IRT can be applied in various medical fields including neurology [1, 2], rheumatology [3], dermatology [4, 5], sports medicine [6–8], dentistry [9, 10] and diabetology [11–13], especially in wound healing monitoring [14–16].

The most common area of IRT medical application is fever screening, e.g. in connection with COVID-19 disease monitoring activities now. IRT was used as a tool for fever screening in human population in virus outbreaks in the past, during SARS outbreaks in particular [17]. This use of IRT was not so ubiquitous and it was applied as a local precaution measure in cited outbreaks. IRT fever screening devices were installed in places with a large concentration of people, typically in airports. Literary sources addressing this topic contain different, often conflicting, conclusions [18–20]. Same authors even state that forehead infrared thermography readings from a distance should be abandoned for fever screening [21]. Ambiguity regarding the appropriateness of this diagnostic method for febrile symptoms may be the result of lack of defined measurement methodology in the past. The measurement methodology and the possible impact of poor procedure in the application of IRT are repeatedly discussed by the authors associated in the European Association of Thermology [22, 23]. The authors plead all users to perform measurements with rigorous standards [24]. The selection of suitable temperature measurement area on human body as well as technical parameters of the used IRT device and its positioning relative to the person being measured play an important role in correct measurement of temperature of the human body.

Threatened by the possibility of infection, people generally adopt a typical and specific behavior. This includes self-separation and spacing when the threat of a communicable disease is anticipated in their environment. Such behavior is even recommended and required as we have witnessed at the time of the coronavirus pandemic. Increasing the distance between the studied object and the IRT device with its operator reduces the active area from which it is possible to read the temperature (ROI). Many measurements in public places (e.g., entrance areas of medical facilities, airports, and transport terminals) are incorrectly performed from a distance of many meters and as a consequence of this fact the monitored person’s faces occupy only a few percent of the total area of the IRT image. The World IEC Fever Screening Standards Explained recommends maximize the number of pixels in the face image, which should be a minimum of 240 by 180 for example [25]. To overcome this barrier, we looked for an alternative simple way to protect the IRT staff operator and the IRT device from infection and contact with potential danger. Would it be possible to use stretched transparent thin plastic foils (plastic wrap, also known as cling film, food wrap) as barriers? Would this go against the required measurement standards and will it result in significant measurement errors?

Materials and methods

The sterile protective cover foil Panep Steriset of 40 μm thickness (PANEP Ltd., Rosice, Czech Republic) was tested – foil1. This foil is routinely used in tertiary hospitals for protection of medical equipment, for example endoscopes and endocameras. The foil is commercially made of polyethylene Bralen FB 3-33. The standard food wrap foil of 9 μm thickness made of polyethylene (Clarima, Brno, Czech Republic) was tested as the second – foil2. The used stretch foil is supplied in rolls with a width of 60 cm.

The IRT images were recorded with infrared camera WIC 640 (Workswell, Prague, Czech Republic) equip-ped with Flir focal plane array microbolometer thermal detector, 640×512 IR resolution, and spectral range from 7.5 μm to 13 μm. The absolute accuracy of the measurement is declared at ± 2 °C or ± 2% of reading and thermal sensitivity of device is 0.03 °C, according to the technical data list provided by the manufacturer. The thermoimages are presented in the socalled rainbow palette.

The calibrated model of a black body (Pyrotherm CS 120, Dias Infrared GmbH, Dresden, Germany) was used as an observed object with defined temperature and defined emissivity (0.98).

The IRT measurement was performed at room temperature condition (22 °C) without external heaters. The IRT images of model of black body were taken from distance of 50 cm. The temperature of black body model was set in rage 32–42 °C by step of 1 °C. IRT measurements were performed without the foil and with 40 μm and 9 μm foil for each temperature setting. The foils were inserted between IRT camera objective and model of black body at the distance of 10 cm from camera´s objective. The foils were positioned and fastened by a frame holder (simulation of protective barriers separating monitored persons from medical staff and equipment operator at the monitoring workplace). As is demonstrated at Fig. 1, the IRT images of human face without the inserted foil and with the foils were obtained from distance of 50 cm under the same experimental setting.

Fig. 1: The experimental setting; A IRT device, B foil, C monitored person.
Fig. 1: The experimental setting; A IRT device, B foil,
C monitored person.

The obtained IRT images were processed by FLIR QuickReport 1.2 (Flir System, Danderyl, Sweden) and CorePlayer (Workswell, Prague, Czech) software. The obtained data were processed by Excel (Microsoft Corporation, Redmond, Washington) software.

The analysis of black body temperature model was performed by using a mean value (obtained approx. from square area ROI of 100×100 pixels).

Results

The object with defined emissivity and various tem-peratures was monitored by the IRT camera (black body model). IRT images were taken without the use of the foil (“without foil” data) and through the foils (“foil1” and “foil2” data) and thus obtained mean temperature values from ROIs were compared.

Temperature set to black body; temperature measured on black body – without foil, foil1, foil2; temperature differences (without foil - foil1 or foil2).

We observed different measured temperature values of the black body model when using different thickness foils as is presented in Table 1. Nonlinear shift between measurements without foil and with foil is evident in the graph in Fig. 2. All data groups (without foil, foil1 and foil2) show the clearly linear dependence but with different slopes. As it is seen, normal measurement without foil also contains a value shift error even though an IRT device with a calibration certificate was used. However, the observed deviation is within the tolerance limits stated by the certificate. The existence of a linear course of all functions is important.

Table 1: Table of measured temperatures for experiment with foils and black body.
Table 1: Table of measured temperatures for experiment
with foils and black body.

Fig. 2: The graphs of IRT measured temperature in depends on black body temperature; rhombus symbol without foil, square foil1 and circle foil2.
Fig. 2: The graphs of IRT measured temperature in
depends on black body temperature; rhombus symbol
without foil, square foil1 and circle foil2.

Temperature differences between temperature values obtained from IRT when the foil was used and temperature values obtained from IRT when the foil was not used in dependence on real temperature of the black body model is shown in Fig. 3. The increasing linear dependence with local deviations caused by detector sensitivity is evident for both used foil types. The calculated average deviation of the actually measured temperature from the idealized linear function

for foil1 and function

for foil2 is 0.09 °C, maximal deviation was found as 0.18 °C from all measurements.

Fig. 3: The graphic representation of IRT measured temperature differences in depends on black body temperature for foil1 and foil2; square symbol represents foil1 and circle foil2.
Fig. 3: The graphic representation of IRT measured
temperature differences in depends on black body temperature
for foil1 and foil2; square symbol represents
foil1 and circle foil2.

The images of the real biological object are seen in Fig. 4. The identical human face in identical position in very short time interval was monitored. The maximal temperature value was determined from inner canthus of the eye by using ROI square selection tool with reading of maximum.

Fig. 4: IRT images of real human face; without foil, measuring through foil1 and foil2; square represent position of maximal measured temperature.
Fig. 4: IRT images of real human face; without foil,
measuring through foil1 and foil2; square represent
position of maximal measured temperature.

Maximal temperature values of inner canthus of eye are shown in Table 2. It is evident that both temperature values obtained by using foil are lower compared to native temperature value obtained without foil. The difference was 1.2 °C in case of foil with thickness 40 μm (Δfoil1) and 0.4 °C in case of foil with thickness 9 μm (Δfoil2). Note, not quite unrelated to the topic, that the temperature difference in left and right inner canthus of eye is 0.3 °C; it is almost comparable to the value Δfoil2 (Table 2).

Table 2: Table of measured temperatures for experiment with foils and real human body.
Table 2: Table of measured temperatures for experiment
with foils and real human body.

Temperature measured on real human body—without foil, foil1, foil2; temperature differences (without foil - foil1 or foil2).

Discussion

Correct measuring of temperature is not as easy as it might seem at first glance. This is even more obvious when measuring living systems. Rapid information about the temperature of a person is desirable in the context of fever screening. The use of IRT for this purpose is a topic of ongoing discussion, but there is much positive scientific evidence [26] favoring its use. IRT is increasingly used as a mean of valid fever screening [27]. Thanks to its contactless principle and speed of detection, it is a suitable tool during epidemic or pandemic of viral or bacterial diseases for the detection of infected people. A really widespread use is currently seen due to the existing COVID-19 pandemic. It is necessary to follow strict measurement rules to obtain valid data, due to the relatively complex process of temperature detection by IRT. The methodology of fever screening was developed and there are some general recommendations accepted worldwide [24, 25, 28, 29]. It is advisable to follow these general instructions, but this is not always fully possible. An example is the situation of recent days, when it was necessary to introduce a screening of patients and not enough suitable IRT devices were available in medical facilities. The authors witnessed many inappropriate procedures, especially in terms of the distance of the monitored person from the IRT device and the place of measurement on the body. One of the factors is also that people do not want to come into close contact with another person, and in the case of manual IRTs, this reduction in distance is necessary for a valid measurement. Shorter distance of monitored person from IRT device assures more pixels for IRT analysis in selected ROI and eliminates possible external sources of back-ground radiation. One option is to use a mechanical barrier, serving as a sterile barrier to prevent the transmission of the infection to the staff and surface of the IRT device. However, this is technically difficult and not in agreement with the existing theoretical recommenddation. The World IEC Fever Screening Standards Explained recommends maximize the number of pixels in the face image, which should be at least 240 by 180; the minimum display of the workable target plane shall be 320 image pixels by 240 image pixels [25]. Appropriate number of pixels in the face image can only be achieved by a decreasing distance between the person being measured and IRT device in case of use of IRT device with a low resolution. The current pandemic situation has shown that many workplaces have only such an IRT device available.

Our recent study tested the idea of using thin foil as a protective material protecting against biological contamination. It is necessary to evaluate whether the data obtained in this way are subject to a large error or not. There are other important factors besides the presence of the foil affecting results of measurement: the sensitivity and stability of the IRT device, ambient temperature, cooperation of the monitored person, etc. However, these factors will affect any others method of the IRT measurement in any case.

The thickness of used foil plays an important role as it is evident from obtained results. Increased thickness increases the deviation from the actual temperature, which is a logical effect. Our study shows results from a 40 µm and 9 µm foil. The 9 µm foil was found to be superior, because the measurement results were found to be closer to the situation, when temperature measurement was performed without foil. The really measured temperature shift compared to the standard is 0.2–1 °C in temperature interval 36–42 °C. According to the interleaved linear dependency function, this shift is 0.1–0.9 °C for the same temperature interval 36–42 °C. This is de facto a measurement error caused by the use of the foil. Much (according to some authors even the total) of this error interval is comparable in value to the variability interval of thermal symmetry of skin human temperature, where up to 1 °C symmetry difference is mentioned [30, 31]. But this is again a topic for discussion, because it is recommended to measure the temperature in the inner canthus of eye, where the temperature is closer to the temperature of the human body core [18]. But even the inner canthus of the eye can show temperature asymmetry, which can be seen in the presented IRT image (Fig. 4) with a dif-ference of 0.3 °C. The discussed measurement error when using the foil does not have to be considered insurmountable with respect to the above; although it is clear that it increases the measurement inaccuracy, especially if the errors add up.

Another more suitable procedure how to deal with the value shift is the recalibration of the obtained data which is possible due to the linearity of the function (Fig. 3). As it can be imagined, it could be done simply by shifting the border value of temperature alarm in the IRT device. The advantage is that often only information about exceeding the threshold temperature is sufficient during fever screening. For example: if we want to set the detection alarm at the value 38 °C, it is necessary to set the value 38 °C based on the calculated parameters of the function

for foil2 and 37.1 °C based on the calculated parameters of the function

for foil1. This will be unique for each individual IRT device. Calculated values included calibration correc-tion of used IRT (see „without foil“ line in Fig. 2).

Given by personal experience, it can be assumed that long-distance measurement without foil by IRT device with lower resolution sensor will be probably burdened with a comparable or even larger error (because the size of ROI will be in dimension units of pixels, maybe not even that) than the presented foil measurement including value correction.

Conclusion

As the development of events in the first months of the year 2020 shows, measuring temperature has become very important. Many institutions are trying to implement fever screening by IRT due to a viral pandemic. Fever screening is subject to strict rules. Very often, however, insufficient equipment or concern for one's own safety and health becomes an obstacle of correct measurements and subsequent actions. It is very important to measure the temperature from a reasonable distance. If the distance between the object and the IRT device is large, the quality of the IRT image analysis decreases because of the decreasing area of ROI in the image. The presented analysis shows the potential usability and level of errors in case of the use of a thin plastic foil as a protective barrier. The results show the shift in measured values as expected. The subsequent discussion argues that it is possible to deal with this error and introduce the use of thin plastic foil for this type of temperature measurement. This statement is valid under the assumption of willingness to accept some uncertainty in accuracy of such measurement, but in the presented case it is shown that this is comparable to the natural signal noise of IRT (which can be identified with as a deviation from best fit line “without foil” in Fig. 2).

Notice

The authors are familiar with the recommendations for contactless measuring of fever by using IRT [23]. The authors know that there are strict rules that clearly define the conditions under which the measurement is to be performed and that in some respects they are not followed in the presented study. This was done in a targeted way due to the study of specific conditions and measurement procedure. Authors recommend performing IRT measurements optimally according to the IEC and ISO standards "IEC 80601-2-59:2017 Medical electrical equipment: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening, ISO/TR 13154:2017 Medical electrical equipment - Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph and ISO 80601-2-56:2017 Medical electrical equipment: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement" and wherever possible.

Acknowledgement

The work has been supported by research grant No. MUNI/A/1369/2019 and 1706/2020 Masaryk University.

Vladan Bernard, Ph.D.

Department of Biophysics

Faculty of Medicine

Masaryk University

Kamenice 3

625 00 Brno

E-mail: vbernard@med.muni.cz


Zdroje
  1. Suzuki Y, Kobayashi M, Kuwabara K, Kawabe M, Kikuchi C, Fukuda M. Skin temperature responses to cold stress in patients with severe motor and intellectual disabilities. Brain and De-velopment. 2013;35(3):265–9. DOI: 10.1016/j.braindev.2012.04.003
  2. Saito H, Omura K, Tateyama M. Alternating monomeric pare-sis with decreased skin temperature and hyperhidrosis in a case of thoracolumbar myelopathy. Clin Auton Res. 2000;10(2):77–80. DOI: 10.1007/BF02279895
  3. Frize M, Ogungbemile A. Estimating rheumatoid arthritis ac-tivity with infrared image analysis. Stud Health Technol Inform. 2012;180:594–8. PMID: 22874260.
  4. Garcia‐Romero MT, Chakkittakandiyil A, Pope E. The role of infrared thermography in evaluation of proliferative infantile hemangiomas. Results of a pilot study. International J of derma-tology. 2014;53(3):e216–7. DOI: 10.1111/ijd.12045
  5. Lee JW, Kim DH, Lee HI, et al. Thermographic follow-up of a mild case of herpes zoster. Arch Dermatol. 2010;146(9): 1053–5. DOI: 10.1001/archdermatol.2010.231
  6. Neves E, Vilaça-Alves J, Antunes N, Felisberto IM, Rosa C, Reis V. Different responses of the skin temperature to physical exercise: Systematic review. 37th Annual International Confer-ence of the IEEE Engineering in Medicine and Biology Society (EMBC). 2015;1307–10. DOI: 10.1109/EMBC.2015.7318608
  7. Neves EB, Cunha RM, Rosa C, et al. Correlation between skin temperature and heart rate during exercise and recovery, and the influence of body position in these variables in untrained women. Infrared Physics & Technology. 2016;75:70–6. DOI: 10.1016/j.infrared.2015.12.018
  8. Novotny J, Rybarova S, Zacha D, Bernacikova M, Ramadan WA. The influence of breast-stroke swimming on the muscle activity of young men in thermographic imaging. Acta Bioeng Biomech. 2015;17(2):121–9. DOI:
    10.5277/ABB-00105-2014-03
  9. Scarano A, Piattelli A, Assenza B, et al. Infrared thermographic evaluation of temperature modifications induced during im-plant site preparation with cylindrical versus conical drills. Clin Oral Implants Res. 2011;13(4):319–23. DOI:
    10.1111/j.1708-8208.2009.00209.x
  10. Matsushita-Tokugawa M, Miura J, Iwami Y, et al. Detection of dentinal microcracks using infrared thermography. J of end-odontics. 2013;39(1):88–91. DOI: 10.1016/j.joen.2012.06.033
  11. Vardasca R, Marques A, Carvalho R, Gabriel J. Thermal imaging of the foot in different forms of diabetic disease. Infrared Imaging. IOP Publishing; 2015:27.1–3.
  12. Balbinot LF, Canani LH, Robinson CC, Achaval M, Zaro MA. Plantar thermography is useful in the early diagnosis of diabetic neuropathy. Clinics. 2012;67:1419–25. DOI: 10.6061/clinics/2012(12)12
  13. van Netten JJ, van Baal JG, Liu C, van der Heijden F, Bus SA. Infrared thermal imaging for automated detection of diabetic foot complications. JDST. 2013;7(5):1122–9. DOI: 10.1177/193229681300700504
  14. Von Felbert V, Schumann H, Mercer JB, Strasser W, Daeschlein G, Hoffmann G. Therapy of chronic wounds with water-filtered infrared-A (wIRA). GMS Krankenhaushygiene Interdisziplinär. 2007;2(2): Doc52. PMID: 20204086.
  15. Staffa E, Bernard V, Kubíček L, et al. Using Noncontact Infrared Thermography for Long-term Monitoring of Foot Temperatures in a Patient with Diabetes Mellitus. Ostomy Wound manage. 2016;62(4):54–61. PMID: 27065215.
  16. Chaves ME, Silva FS, Soares VP, et al. Evaluation of healing of pressure ulcers through thermography: a preliminary study. Res. Biomed. Eng. 2015;31(1):3–9. DOI:
    10.1590/2446-4740.0571
  17. Chiu WT, Lin PW, Chiou HY, Lee WS, Lee CN, Yang YY, et al. Infrared Thermography to Mass-Screen Suspected SARS Patients with Fever. Asia Pac J Public Health. 2005;17(1);26–8. DOI: 10.1177/101053950501700107
  18. Ring F. Pandemic: Thermography for fever screening of airport passengers. Thermology International. 2007;17(2):67.
  19. Lahiri BB, Bagavathiappan S, Jayakumar T, Philip J. Medical applications of infrared thermography: A review Infrared Physics & Technology. 2012;55(4):221–35. DOI: 10.1016/j.infrared.2012.03.007
  20. Howell KJ, Smith RE. Temperature of the face in children and fever screening by thermography. Thermology International 2011;21(3):81–5.
  21. Chan LS, Lo JL, Kumana CR, Cheung BM. Utility of infrared thermography for screening febrile subjects. Hong Kong Med J. 2013;19(2):109–15. PMID: 23535669.
  22. Mercer J, Ring EF. Fever screening and infrared thermal imaging: concerns and guidelines. Thermology International. 2009;19(3):67–9.
  23. Howell KJ, Mercer J, Smith RE. Infrared thermography for mass fever screening: repeating the mistakes of the past? Thermology International. 2020;30(1):5–6.
  24. IEC 80601-2-59:2017: Medical electrical equipment – Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening.
  25. World IEC Fever Screening Standards Explained. Charles Rollet, 2020. Available from:
    https://ipvm.com/reports/iec-fever
  26. Nguyen AV, Cohen NJ, Lipman H, et al. Comparison of 3 infrared thermal detection systems and self-report for mass fever screening. Emerg Infect Dis. 2010;16(11):1710–7. DOI: 10.3201/eid1611.100703
  27. Ghassemi P, Pfefer TJ, Casamento JP, Simpson R, Wang Q. Best practices for standardized performance testing of infrared thermographs intended for fever screening. PLOS ONE. 2018; 13(9):e0203302. DOI: 10.1371/journal.pone.0203302
  28. Enforcement Policy for Telethermographic Systems During the Coronavirus Disease 2019 (COVID-19) Public Health Emer-gency, U.S. Department of Health and Human Services Food and Drug Administration, Center for Devices and Radiological Health (CDRH), Office of Product Evaluation and Quality (OPEQ), April 2020. Available from: https://www.fda.gov
  29. ISO/TR 13154:2017: Medical electrical equipment — Deploy-ment, implementation and operational guidelines for identi-fying febrile humans using a screening thermograph.
  30. Niu HH, Lui PW, Hu JS, et al. Thermal symmetry of skin temperature: normative data of normal subjects in Taiwan. Chinese Medical Journal (Taipei). 2001;64(8):459–68. PMID: 11720145.
  31. Silberstein EB, Bahr GK, Kaitan J. Thermographically mea-sured normal skin temperature asymmetry in the human male. Cancer. 1975;36:1506–10. DOI:
    10.1002/1097-0142(197510)36:4<1506::aid-cncr2820360444>3.0.co;2-x
Štítky
Biomedicína
Kurzy Podcasty Doporučená témata Časopisy
Přihlášení
Zapomenuté heslo

Zadejte e-mailovou adresu, se kterou jste vytvářel(a) účet, budou Vám na ni zaslány informace k nastavení nového hesla.

Přihlášení

Nemáte účet?  Registrujte se

#ADS_BOTTOM_SCRIPTS#